Prosaris OL1 Usage Guide
Step 1
UNBOX YOUR OL SERIES
- Remove the OL series from its packaging
- Attach the included mounting plate to your Android device. Ensure that the plate is placed in such a way that the camera is not obscured when the OL series is connected
- It is recommended to charge the device fully before first use
Step 2
DOWNLOAD THE APP AND CONNECT YOUR ANDROID DEVICE
- Download the Prosaris Leak Management app on Google Play to your Android device
- Open the Prosaris app and attach the OL series to the back of the Android device to the mounting plate. Make sure that the “Prosaris” logo on the OL series is right-side up and horizontal to the bottom of the Android device when in landscape mode
- Enter your information as prompted and press “Register Device.” Make sure the Android device is connected to the Internet for this registration step. The app will confirm when it is connected with the OL series device and ready to use
Step 3
FIND A LEAK
- Press the “Find Leak” button at the start of the app
- Follow the directions provided on the screen
- When close enough to the leak source for accurate quantification, the app will tell you and confirm when optimum data has been obtained
Step 4
LEAK FOUND
- Once a leak has been found and you have been provided basic information about the leak, press the “Save changes” button to create a leak event record
- Advanced leak record management options are available based on application modules chosen
- Continue with further detection or simply close the app to finish
Step 5
REMOVE THE OL SERIES AND RETURN TO CASE
- Holding the Android tablet firmly in place, pull and rotate the OL series device off of its magnetic base
- Place the OL series device back into your carrying case. Magnet side facing in will allow the OL series device to be secure in position inside the case. If necessary, place the OL series device on charge before returning it to the case
- Close case and store, ready for next time!